Model:LS Factory direct sales,High quality,Low price,Best service
Model:LS Factory direct sales,High quality,Low price,Best service
Add:Dazhoucun Industrial Park, Chengyang District, Qingdao, China.
Tel:+86 13608965318 +86 13668890402
Fax:+86 532 88721733
E-mail:sales@powtech-cn.com
Conductor/Strand Splice
Splices are intended to joint homogeneous conductors/strands and to provide restorative repair.
Jointing
On homogeneous conductors/strands, Splice will hold the full rated breaking strength. On ACSR, Splice will only hold the full strength of the outer aluminum strands. Conductance will be better than in an equivalent length of un-spliced conductor.
Restorative repair
Splice will restore original conductivity to homogeneous conductors and aluminum layer of ACSR. They will also restore full mechanical strength to homogeneous conductors and strands.
On ACSR, strength will be restored to all of the aluminum strands but not to core. When core damage on ACSR is suspected refer to Section of Full Tension Splice.
Tapping
Tapping over Splice is not recommended.
Material used
Splices are made of material compatible with the conductor/strand to which they are applied.
Production Characteristics
Color Code: Assist in identification of conductor size
Sub-sets: Individual rods assembled and gritted into groups of two, three, or four, corresponding to tabular information appearing on catalog pages.
Identification label: Shows catalogue number and strand diameter range.
Lay direction: Must be same as that of the outer layer of the strand to which it is applied
Center Mark: Establishes recommended alignment of rods during application
LS-10100 Series for ACSR,AAC,AAAC Strand
Product model | Units per carton | Weight per carton (lbs.) | Length (inches) | Rod diameter (inches) | No. of Sub-sets | Color code |
LS-10106 | 50 | 6 | 21 | 0.086 | 2 | Purple |
LS-10108 | 50 | 6 | 22 | 0.086 | 2 | Blue |
LS-10112 | 50 | 9 | 24 | 0.086 | 2 | Brown |
LS-10114 | 50 | 10 | 26 | 0.094 | 3 | Orange |
LS-10115 | 50 | 11 | 26 | 0.094 | 3 | Green |
LS-10116 | 50 | 12 | 27 | 0.094 | 3 | Yellow |
LS-10118 | 50 | 13 | 28 | 0.094 | 3 | Purple |
LS-10119 | 50 | 15 | 30 | 0.102 | 3 | Brown |
LS-10120 | 50 | 16 | 31 | 0.102 | 3 | Red |
LS-10121 | 50 | 16 | 31 | 0.102 | 3 | Blue |
LS-10122 | 50 | 17 | 33 | 0.102 | 3 | Orange |
LS-10123 | 50 | 19 | 34 | 0.102 | 3 | Green |
LS-10124 | 50 | 27 | 38 | 0.121 | 3 | Black |
LS-10125 | 50 | 27 | 38 | 0.121 | 3 | Yellow |
LS-10127 | 50 | 27 | 40 | 0.121 | 3 | Brown |
LS-10129 | 50 | 37 | 42 | 0.136 | 3 | Blue |
LS-10130 | 50 | 43 | 46 | 0.136 | 3 | Green |
LS-10131 | 50 | 46 | 46 | 0.146 | 3 | Orange |
LS-10133 | 50 | 46 | 46 | 0.146 | 3 | Orange |
LS-10134 | 50 | 66 | 51 | 0.167 | 3 | Black |
LS-10135 | 25 | 48 | 61 | 0.182 | 3 | Blue |
LS-10136 | 25 | 50 | 63 | 0.182 | 3 | Purple |
LS-10137 | 25 | 58 | 67 | 0.182 | 3 | Yellow |
LS-10138 | 25 | 66 | 790 | 0.204 | 3 | Brown |
LS-10139 | 25 | 68 | 70 | 0.204 | 3 | Orange |
LS-10140 | 15 | 62 | 77 | 0.250 | 3 | Green |
LS-10141 | 15 | 64 | 79 | 0.250 | 3 | Black |
LS-10142 | 15 | 74 | 83 | 0.250 | 3 | Purple |
LS-10143 | 3 | 18 | 84 | 0.250 | 3 | Red |
LS-10145 | 3 | 23 | 99 | 0.250 | 3 | Orange |
LS-10146 | 3 | 31 | 105 | 0.310 | 3 | Orange |
LS-10147 | 3 | 36 | 108 | 0.310 | 4 | Brown |
LS-10148 | 3 | 37 | 111 | 0.310 | 4 | Yellow |
LS-10149 | 3 | 39 | 121 | 0.310 | 4 | Green |
LS-10150 | 3 | 45 | 127 | 0.310 | 4 | Black |
LS-10151 | 3 | 59 | 137 | 0.365 | 4 | Purple |
LS-10152 | 3 | 62 | 141 | 0.365 | 4 | Red |
LS-10153 | 3 | 63 | 143 | 0.365 | 4 | Blue |
LS-10155 | 3 | 101 | 165 | 0.438 | 4 | Yellow |
LS-1500 Series for Aluminum Clad Steel Strand
Product model | Units per carton | Weight per carton (lbs.) | Length (inches) | Rod diameter (inches) | No. of Sub-sets | Color code |
LS-1512 | 50 | 34 | 30 | 0.102 | 3 | Purple |
LS-1513 | 50 | 46 | 33 | 0.114 | 3 | Blue |
LS-1514 | 50 | 67 | 38 | 0.128 | 3 | Brown |
LS-1515 | 25 | 55 | 50 | 0.144 | 3 | Green |
LS-1516 | 25 | 75 | 55 | 0.162 | 3 | Red |
LS-1517 | 10 | 48 | 67 | 0.183 | 3 | Green |